Click on the + to the right of any item to add it to your list
Packaging
Bag Conveyors
UCPE-2537
300 mm wide x 2.0 metre long powered roller track on support frame.
( 2 available )
Price - £200 each
Bag Placers
Complete Packing Line
UCPE-6144
Complete bagging line with machines varying from 2008 to 2014 vintage. The plant was bagging animal feed pellets in polypropylene bags at up to 14 tph. The line comprises a Chronos bag weigher believed to be an E55 with Speedac 7 controls. Below this is a Pacepacker bag placer and a Pacepacker stitcher and bag conveyor on a height adjustable chassis. The bags are tipped flat before being conveyed to a FujiAce robot palletiser.
Price - £50,000
UCPE-4651
Morray bagging line comprising a bag placer, birds beak bag clamp, bag aligner, bag closer, bag stitcher, bag posser, bag kicker and bag conveyor. Some parts missing.
Price - £8,000
Form Fill & Seal Machine
UCPE-5736
Hassia Flexibag model 130-75-62 vertical form fill and seal machine with weigher, flattener, exit conveyor and two different sized forming tubes. This machine can fill peat into 10 litre to 80 litre sized packs depending on tube size. With 10 litre packs the output is up to 18 bags per minute at with 80 litre up to 12 bags per minute. This machine was built in 1996. This machine was bagging sawdust and wood chip but it is also capable of bagging peat.
The Ridder palletiser UCPE-5735 was working in conjunction with this machine.
Price - £15,000
Pallet Turntables
UCPE-4551
Pallet turntable 2.5 metres diameter with 1.25 metre wide gravity roller track mounted on it. The rollers are 75mm dia on 100mm pitch. This is all that remains of a pallet wrapper with mast and power unit.
( 2 available )
Price - £750 each
Pallet Wrappers
UCPE-6135
Loveshaw HP500 pallet wrapper with turntable. 240v 1ph 50Hz. It has a purpose built rectangular pallet turntable 1520mm x 1320mm.
Price - £3,000
Palletisers
UCPE-5305
Pacepacker F1 low level palletiser with pallet magazine, entry and exit conveyors and control panel. Believed to be 1995 vintage.
Price - £7,500
UCPE-5735
Ridder model P300 high level palletiser built in 1997. This machine has input conveyor, bag flattener, pallet magazine (adjustable for different pallet sizes) and exit powered roller track. No control equipment. This machine was working in conjunction with the Hassia form, fill and seal unit UCPE-5736.
Price - £10,000
UCPE-2540
Pieri-Verbruggan palletiser/collator and film wrapper for small polythene wrapped bales. The collator section forms a block of 12 bales and ejects them to a rotating head film wrapper. This block is moved along a powered roller track and parked on a section of belt conveyor. A second block of similarly wrapped bales is parked on an adjacent section of belt conveyor. The two packs are folded into a block of 24 bales by raising the two belt conveyor sections. The block is then moved to a top sheeter and turntable wrapper. The block of 24 bales is then lifted onto a pallet and ejected onto a gravity roller track. The whole unit is about 18 metres long x 3.0 metres wide and 3.0 metres high and it has all controls and sensors and is surrounded by a security barrier. It is capable of 1000 packs per hour and has done very little work. The machine is now dismantled and in store. It was handling 600 mm x 280 mm x 750 mm bales.
Price - £50,000
Stitchers & Sealers
UCPE-6080
Stainless steel OK heat sealer on mild steel pedestal. Model SS2 Mk2B, new 09/2003. Ser No 2704. R to L feed. Average condition.
Price - £1,000
UCPE-6081
OK heat sealer model SB1 P-L. Has a pedestal but currently not mounted on it. This is a mild steel unit new 05/2005 Ser No B1580. L to R feed. Poor condition, some damage.
Price - £400
UCPE-6180
Medway stitcher mounted on a rise and fall pedestal. It has a non-standard bag conveyor belt with no back board.
Price - £1,250
UCPE-3596
Thames Packaging hot air continuous heat sealer on pedestal. This is quite old and is smaller than a Saxon 5. There are quite a lot of spares with this machine.
Price - £1,500
