Item reference UCPE - 5712 added to list

Click on the + to the right of any item to add it to your list

Conveyors

Belt

UCPE-4505

Tickhill Engineering belt conveyor probably for vegetable handling. It is 2.4 metres long has a part stainless steel part galvanised case and a 280 mm wide flat belt with finger cleats on it.

Price - £300

+

UCPE-5665

Carier 230 mm wide belt conveyor 12.7 metres long with drive and galvanised case but no tail or belt.

Price - £800

+

UCPE-6189

Asmech stainless steel wavy wall inclined belt conveyor with reception hopper. The belt is 390mm wide between walls. Walls and cleats are 50mm high and the conveyor is 3.5 metres long. Look as if it has never been used.

Price - £5,500

+

UCPE-5717

Belt conveyor with 400 mm wide troughed belt and drive. Conveyor is 3.4 metres overall with 2.6 metre drum centres.

Price - £500

+

UCPE-6234

Tong inclined flat belt conveyor on support frame with drive. The belt is 500mm wide with cleats on 360mm centres. The conveyor is 2 metres long and has a body depth of 260mm.

Price - £500

+

UCPE-6134

Wavy wall belt conveyor 4.0 metres long with supporting steelwork to allow it to work at a steep angle. The belt is 500mm between the wavy walls which are 100mm deep and it has 50mm deep cleats.

Price - £2,000

+

UCPE-5721

Carier 500 mm belt conveyor 6.0 metres long with galvanised case, no belt.

Price - £750

+

UCPE-6230

Wavy wall belt conveyor with blue belt and 500mm working width. The belt conveyor is 7.2 metres long with 100mm high wall and 50mm high cleats on 200mm centres. The conveyor has a painted case 250mm deep and drive. There is some damage to the wavy wall.

Price - £3,000

+

UCPE-6169

Chevron belt conveyor 500mm wide x 13 metres long with drive. Body is 330mm deep and it has 150mm high steel side walls with rubber skirt.

Price - £2,500

+

UCPE-4409

Roll of 600 mm wide chevron belting 15.0 metres long. Believed to be unused.

Price - £500

+

Chain & Flight

UCPE-4514

Redler Enmasse chain and flight conveyor with 125 mm wide flight in a 150 mm wide painted case 280 mm deep. The conveyor is 5.0 metres long, no drive and the conveyor is not in very good condition.

Price - £400

+

UCPE-4507

Redler Enmasse chain and flight conveyor with 125 mm wide flight in a 150 mm wide painted case 280 mm deep. The conveyor is 6.9 metres long and has a drive unit but is not in very good condition.

Price - £650

+

UCPE-6060

100mm chain and flight conveyor 5 metres long with a body depth of 450mm and an intake hopper 3 metres long x 100m deep. Geared drive projects 600m to one side.

Price - £600

+

UCPE-4503

200 mm wide chain and flight conveyor 8.0 metres long with galvanised case 320 mm deep. No drive and the chain is broken.

Price - £300

+

UCPE-4506

Redler Enmasse chain and flight conveyor with 230 mm wide flight in a 250 mm wide painted case 360 mm deep. The conveyor is 5.6 metres long and has a Rocon rotation detector on the tail idler but no drive.

Price - £650

+

UCPE-4512

Redler Enmasse chain and flight conveyor with 230 mm wide flight in a 250 mm wide painted case 360 mm deep. The conveyor is 11.8 metres long and comes with a drive and it has a Rocon rotation detector on the tail idler. 7.28 metres of the case is 530 mm deep

Price - £1,750

+

UCPE-5835

Grespan 35/25 chain and flight conveyor 250mm wide x 370mm deep x 4.2M long. The conveyor has a galvanised case, 1.5kw drive and will handle up to 75M3/hr. Some damage to motor fan cover.

Price - £1,500

+

UCPE-5734

Cimbria stainless steel cased chain and flight conveyor with swan neck bend and inclined outlet end. The case is 260 mm wide x 345 mm deep and the 240 mm wide chain carries heavy duty plastic flights. The stainless body needs some work. The conveyor is 9.3 metres long. Spare chain and flights available at extra cost.

Price - £1,500

+

Link Plate

UCPE-6173

400mm wide link plate swan neck conveyor with twin roller chains, steel cleats and side walls. The case is 500m wide x 370mm deep. The conveyor has a 1950mm long horizontal intake section with hopper, a 3000mm long inclined section followed by a 600mm long horizontal discharge section with outlet and drive.
( 3 available )

Price - £2,500 each

+

UCPE-6174

600mm wide link plate swan neck conveyor with twin roller chains, steel cleats and side walls. The case is 720m wide x 520mm deep. The conveyor has a 1800mm long horizontal intake section with hopper, a 2000mm long inclined section followed by a 600mm long horizontal discharge section with outlet and drive.

Price - £3,000

+

Picking Table

UCPE-4509

Tickhill Engineering conveyor probably for vegetable sorting or washing. It is 9.0 metres long and has a 900 mm wide plastic mesh belt with cleats. Not in good order.

Price - £750

+

Pneumatic

UCPE-6025

PAM blower with 18.5kw drive, Ser No 972321 believed 1997 vintage.

Price - £500

+

UCPE-6158

Purpose built portable grain blower with 30kw motor and Westinghouse GS250 blowing seal.

Price - £1,500

+

UCPE-1519

Pneumatic transfer system for herbs or low density products comprising a small hopper with a variable speed tray feeder discharge feeding into a suction pipeline. The suction line goes to a small receiving hopper with an Airmaster RJX 3/9/33 reversejet filter with 1.5kw fan and silencer. The hopper outlet is fitted with a pneumatic slide for releasing the batch.

Price - £1,000

+

Round Case Screw

UCPE-6172

Heavy duty 200mm diameter round cased screw conveyor sections no drives. Probably conveying hot ash from gasifiers.
1 x 1.1 metres
2 x 3.7 metres
1 x 3.5 metres
1 x 5.1 metres
Offered as a job lot.

Price - £2,000

+

UCPE-6170

Ajax heavy duty low speed round cased screw conveyor with 200mm diameter flight, 200mm pitch and 75mm diameter centre tube. 3.0 metres long plus 500mm for drive.

Price - £1,500

+

UCPE-6171

Ajax heavy duty low speed round cased screw conveyor with 200mm diameter flight, 200mm pitch and 75mm diameter centre tube. 4.0 metres long plus 500mm for drive.

Price - £1,750

+

UCPE-6210

250mm diameter round cased screw 4.5M long with geared motor and chain drive.

Price - £2,000

+

UCPE-6211

250mm diameter round cased screw 5.0M long with geared motor and chain drive.

Price - £2,000

+

UCPE-6087

500mm diameter x 7.0 metre long heavy duty round cased screw conveyor with 7.5kw in line geared drive and 100 rpm flight speed. Excellent condition.

Price - £5,000

+

Shrouded Chain

UCPE-6233

Twin chain conveyor head only with drive. Case is 650mm wide x 340mm deep and it has a working width of 500mm.

Price - £500

+

UCPE-6168

Twin chain conveyor 20 metres long with 100mm deep plastic flight extensions. Overall width 825mm and working width is 620mm.

Price - £7,500

+

UCPE-5731

Twin chain conveyor with 820 mm wide body 510 mm deep. The chain is 800 mm wide and has heavy duty plastic flights. The conveyor is 11.5 metres long including a swan neck bend and inclined outlet end with drive. In poor condition but some spares available at extra cost.

Price - £2,000

+

UCPE-5730

Twin chain conveyor with 820 mm wide body 510 mm deep. The chain is 800 mm wide and has heavy duty plastic flights. The conveyor is 14 metres long including a swan neck bend and inclined outlet end with drive. In poor condition but some spares available at extra cost.

Price - £2,500

+

Thrower

UCPE-5419

Swift twin grain thrower with in feed hopper 2 x 200mm diameter screw feeders and 15kw paddle wheel. Rated at up to 100 tph.

Price - £1,250

+

UCPE-4637

Ardleigh Swift paddle type grain thrower on wheels with motorised auger force feeding a rotating paddle thrower with a 4.0 kw drive. Believed to have a capcity of up to 40 tph.

Price - £450

+

U Trough Screw

UCPE-6208

150mm diameter U trough screw conveyor 4.5M long with drive and end outlet.

Price - £750

+

UCPE-4504

200 mm diameter U trough screw conveyor 3.0 metres long with top mounted head drive.

Price - £400

+

UCPE-5516

250 mm diameter U trough screw conveyor 2.1 metres long with drive.

Price - £450

+

UCPE-6056

320mm dia x 2 metre long U trough screw conveyor with in-line drive requiring another 780mm in length. Some damage to drive alignment.

Price - £600

+

UCPE-6213

350mm diameter U trough screw conveyor 14.5M long with drive, an intermediate electro pneumatic outlet slide and an end outlet.

Price - £5,000

+

UCPE-4608

Purpose made 400 mm dia levelling screw 2.65 metres long mostly in stainless steel. The conveyor has an open base, a top mounted drive and a centrally mounted inlet hopper. The flighting is contrawound to move the product in two directions from the central filling hopper

Price - £1,000

+

UCPE-4605

Texpan U trough screw conveyor 600 mm dia x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shuttle from side to side in a framework with rails, a drive motor and limit switches. The framework is 6.6 metres long x 1.4 metres

Price - £2,000

+