Click on the + to the right of any item to add it to your list

Storage

Hoppers

UCPE-5474

Stainless steel hopper in mild steel support frame. The hopper is 1.87 metres long x 1.38 metres wide x 1.7 metres high with an enclosed top with entry port and vent. The bottom outlet is off center, flanged 480 mm x 480 mm and is at base level. Working volume estimated to be about 2 M3. Hinged access door in one side.

Price - £1,500

+

UCPE-5475

Stainless steel circular hopper in rectangular mild steel support frame. The hopper is 2.1 metres diameter with a 500 mm vertical section and an 800 mm deep cone terminating with a 250 mm diameter electro pneumatic butterfly valve. 800 mm below the valve there is an electro pneumatic inflating sealing ring. Working hopper volume is about 2 M3. This hopper was filling big bags.

Price - £2,000

+

UCPE-5479

Aluminium hopper 1.7 metres diameter with 2.1 metre vertical wall and 1.3 metre deep cone terminating in a 200 mm diameter flanged outlet. The hopper top is enclosed and has a tangential blowline entry pipe and a DCE model UMA 150V dust filter on top with a shaker motor but no fan. The filter adds 1.0 metre to the height. There is a side access hatch and motorised high and low level switches. Working volume is about 5.0 M3.

Price - £2,500

+

UCPE-5484

Stainless steel hopper 1.75 metres diameter with 1.3 metres vertical, 1.15 metres deep cone and flanged outlet. Working volume about 3 M3. The cone is hinged and clamped together for easy access and it has compressed air operated fluidisers.

Price - £1,500

+

UCPE-5485

Aluminium hopper 1.7 metres diameter with 2.0 metres vertical and 1.25 metre deep cone with flanged outlet. The body has support brackets tangential blowline entry, sloping top with vent and flanged port for dust filter (see item UCPE-5471). There are motorised high and low level switches fitted. The cone has a fabric pad lining and air entries to inflate it to aid product flow. Working volume about 5 M3.
( 3 available )

Price - £2,500 each

+

UCPE-5486

Aluminium hopper body only, no cone, 1.7 metres diameter with 2.0 metres vertical. The body has support brackets tangential blowline entry, sloping top with vent and flanged port for dust filter (see item UCPE-5471). There are motorised high and low level switches fitted.

Price - £1,000

+

UCPE-5487

Stainless steel hopper 1.5 metres diameter with 1.76 metres vertical and 1.0 metre deep cone with flanged outlet. The hopper has a tangential blowline entry and flat top with exhaust duct. Working volume about 3.5 M3. Cone has some dents.

Price - £1,750

+

UCPE-5488

Aluminium hopper 1.6 metres diameter with 1.18 metres vertical and 1.45 metre deep cone with flanged outlet. Working volume about 2.5 M3.

Price - £1,250

+

UCPE-5489

Aluminium hopper with mild steel support frame. The hopper is 1.6 metres diameter with 700 mm vertical and 1.23 metre deep cone with 200 mm diameter flanged outlet. The hopper has a tangential blowline entry and flat top with exhaust duct. Working volume about 1.5 M3.

Price - £1,000

+

UCPE-5710

3.0 metre long x 1.5 metre wide hopper with closed top and supporting steelwork. 1.5 metre high vertical section and 1.25 metre deep hopper with 5 No outlets. Working volume about 7 M3.

Price - £650

+

Silos

UCPE-5104

Aluminium smooth wall silo with some supporting steelwork, believed to have been storing plastic granules at 680 kg. per cubic metre. The silo is 3.28 metres diameter and has a sloping top rising 600 mm with an access hatch, pressure relief valve, blowline entry and flanged port for a dust filter (not available). The silo has a 13.5 metre high vertical wall and two external stiffening rings. The silo is skirted 480 mm below the vertical wall and has support pads and external stiffening for sitting on steelwork. The silo was sitting on loadcells (not available). The cone is approx 60 degree, has facilities for compressed air fluidisers and has a 200 mm diameter outlet. Level full volume approx 120 cubic metres.

( 4 available )

Price - £7,000 each

+

UCPE-5105

Aluminium smooth wall silo with some supporting steelwork, believed to have been storing plastic granules at 680 kg.cubic metre. The silo is 3.28 metres diameter and has a sloping top rising 600 mm with an access hatch, pressure relief valve, blowline entry and flanged port for a dust filter (not available). The silo has a 13.0 metre high vertical wall and two external stiffening rings. The silo is skirted 480 mm below the vertical wall and has support pads and external stiffening for sitting on steelwork. The silo was sitting on loadcells (not available). The cone is approx 60 degree, has facilities for compressed air fluidisers and has a 250 mm diameter outlet. Level full volume approx 117 cubic metres.

Price - £7,000

+

UCPE-5649

Mild steel silo 3.5 metres inside diameter with insulation and corrugated aluminium cladding. The silo is 10.83 metres, giving working volumes of approximately 40 cubic metres. The silo has 65 degree hoppering with a 1.83 metre diameter bin activator on the cone base. The activator outlet is 2.0 metres above base level.
Within the overall height of the silo there is a 2.0 metre high penthouse with an access door on each side. The silo is set up for pneumatic filling and has a cased DCE Dalamatic reversejet filter fitted and a set of explosion relief panels but the membranes need replacing. There are explosion relief panels on the penthouse roofs as well.
This silo is compatible with the three silos ref UCPE-5308 apart from the height.

Price - £4,000

+

UCPE-5847

Galvanised dust storage silo constructed from smooth flanged panels. This silo is 4.0M diameter for 9.0M and then the walls slope out over a height of 1.3M to a diameter of 5.0M. There is approximately 5.0M of vertical wall at 5.0M diameter. The top is handrailed and there are access ladders. The top 5.0M section of the silo is a reversejet filter with 380 tubular bags 120mm diameter x 4.0M long giving a filter area of 573M2. It has a vertical exhaust and explosion relief panels. Dust is blown into the silo at a tangent on the section where the diameter changes. The silo has a flat floor 3.0M above base level with a sweep arm discharge driven by a 15kw gearmotor. Total storage volume is approximately 75M3 but working volume will be less.

Price - £25,000

+

UCPE-6001

Sawdust/small woodchip silo 5.0 metres diameter about 8.0 metres overall high with paint finish and reversejet filter on flat top. The silo is free standing, has about 4.0 metres vertical wall and a 2.3 metre deep cone giving a working volume of about 100 cubic metres. Discharge is via an internal agitator and a rotary valve.

Price - £5,000

+

UCPE-6012

Sawdust storage silo by Handling Techniques. Freestanding unit about 1.5 metres diameter x 4.0 metre wall height and paint finish. It has a flat bottom with a sweep arm discharge. About 8 cubic metres total volume.

Price - £1,000

+

UCPE-6013

Sawdust storage silo with sweep arm discharge on a flat bottom. The silo is about 4.0 metres diameter with a 6.0 metre wall height and it sits on short legs. It has a paint finish and flat top with a reversejet filter on top. Total volume about 75 cubic metres.

Price - £3,000

+

Tote Bins

UCPE-5701

Selection of steel framed/ plastic inner tote bins.1.2 M X 1.2 M square heights vary. Some fitted with plastic slides others with metal. The units have lids available. Capable of 1 tonne of cereals.
( 23 available )

Price - £150 each

+