Click on the + to the right of any item to add it to your list




Shini SG 3048 granulator with 11 kw drive and 300 mm x 480 mm cutting chamber. Built 2005. Being used as a cereal cutter.

Price - £3,500



Shini SG 3048 granulator with 11 kw drive and 300 mm x 480 mm cutting chamber. Built 2008. Being used as a cereal cutter.

Price - £3,500



Meltec granulator with 1.5 kw motor. Possibly model 280.
( 2 available )

Price - £850 each


Hammer Mills


Champion hammer mill beaters, unused, in boxes of 45 balanced sets. There are 48 boxes available. Each beater has hardened edges making them 70 mm wide at the work end and 64 mm wide at the support end. They are 253 mm long x 6 mm thick with a 32 mm hole for the support shaft. Price per box.
( 48 available )

Price - £450 each



Taurus hammer mill model VM55 with a 55kw direct drive. This mill has a horizontal rotor and screen and a vertical motor. It has two inlets each with a magnet fitted. There are dust filter socks attached to the body and milled material drops out vertically via an under hopper. No fan or filter required. Output believed to be up to 10tph on cereals.
( 2 available )

Price - £3,000 each



40kw swing beater hammer mill believed to be by Peat Drewery. On base with direct drive, gravity discharge, no feeder.

Price - £1,000



Cormall HDH-770 hammer mill with centre feed and 45kw vee belt drive. Been through the workshop and ready to go.
( 2 available )

Price - £8,500 each



Christy X26 hammer mill on base plate, no drive, no feeder, no magnet chute. Rotor and beaters in good order.

Price - £3,000



Skjold BM2 centre fed hammer mill with built in transportation fan and direct coupled 7.5kw motor. Has suction fed pipe and heavy particle trap.

Price - £400



Andritz Optimill 900 hammer mill with 315kw 1485rpm direct coupled drive on base plate with anti vibration mountings, built 2008. The hammer mill comes with a small feed hopper, triple screw feeder and heavy particle separator. Also included is an under-hopper with supporting steelwork and a triple screw discharger and an Andritz EFF 48/2400 reversejetfilter with a 15kw extraction fan.

Price - £40,000



Andritz Sprout 1000B Multimill with 250kw motor, service hopper, twin screw feeder and heavy particle separator. Built 2008. Includes some spare screens and hammers and starter panel. Also included is an Andritz reversejet filter with outlet rotary valve and exhaust fan.

Price - £40,000



Christy B7/2 hammermill on base plate with a direct coupled 37 kw drive (seems to be well oversized). There is no fan on the mill but the base is designed for one and the drive shaft is extended to accept one. Milled product will have to be sucked away independently.

Price - £1,250




Christy 16 x 24 pulveriser with 55kw vee belt drive. The pulveriser comes on a stand with an inlet hopper and and control box with soft start. It has been completely overhauled including all new internals and has done little work since. It comes with:-
1 set of unused 5mm screens.
1 set of unused hammers.
1 set of little used 25mm screens.
1 set of 12mm screens currently in the pulveriser.

Price - £15,000


Tub Grinders


Cormall RBS260 tub grinder believed 1990's vintage. It is a single rotor machine with a 37kw drive. It has a recently fitted new rotor and discharge auger. Tub drive is 3kw and auger drive 2.2kw.

Price - £11,000



Cormall RBS260 tub grinder with 37kw drive and refurbished rotor and discharge screw.

Price - £9,500