Click on the + to the right of any item to add it to your list

Conveyors

Belt

UCPE-5765

90 degree belt conveyor 800 mm wide. the unit is in good condition with a good belt.

Price - £1,000

+

UCPE-4505

Tickhill Engineering belt conveyor probably for vegetable handling. It is 2.4 metres long has a part stainless steel part galvanised case and a 280 mm wide flat belt with finger cleats on it.

Price - £300

+

UCPE-5263

Carier 230 mm wide x 12.00 metre long belt conveyor with galvanised case, inlet and end outlet.
( 2 available )

Price - £1,750 each

+

UCPE-5665

Carier 230 mm wide belt conveyor 12.7 metres long with drive and galvanised case but no tail or belt.

Price - £800

+

UCPE-5663

Carier 9" belt conveyor with motorised movement accross shed and slides to change outloading points. 16 meters long. was used to evenly fill grain store with UCPE 5662

Price - £2,600

+

UCPE-5662

Carier 9" belt conveyor 24 meters long with trip.

Price - £3,000

+

UCPE-5264

Carier 380 mm wide x 8.0 metre long belt conveyor with galvanised case, inlet, tripper and end outlet.

Price - £2,000

+

UCPE-5717

Belt conveyor with 400 mm wide troughed belt and drive. Conveyor is 3.4 metres overall with 2.6 metre drum centres.

Price - £500

+

UCPE-6035

Cleated flat belt conveyor 5.0 metres long in 500 mm deep case with paint finish. The belt is 500 mm wide with steel cleats 60 mm high on 250 mm centres. Some damage to motor fan cover.

Price - £1,500

+

UCPE-5721

Carier 500 mm belt conveyor 6.0 metres long with galvanised case, no belt.

Price - £750

+

UCPE-5206

600 mm wide inclined belt conveyor on frame with inlet hopper and discharge height of 2.75 metres. The conveyor length is 7.9 metres and the belt is smooth and running on troughing idlers.

Price - £2,500

+

UCPE-4409

Roll of 600 mm wide chevron belting 15.0 metres long. Believed to be unused.

Price - £500

+

UCPE-4495

800 mm wide x 11.5 metre long chevron belt conveyor on lattice frame, with troughing idlers and drive. It has galvanised covers and the belt is good.

Price - £3,000

+

UCPE-5763

PacePacker inclined bag conveyor. The unit is 800 mm wide 2300 mm long.

Price - £800

+

UCPE-4801

Flat belt conveyor with support frame and drive. This is a low speed machine for low density products. It has two chains with steel bars between them carrying an 830 mm wide flat belt. The conveyor is 9.0 metres long.
( 2 available )

Price - £4,500 each

+

Chain & Flight

UCPE-4514

Redler Enmasse chain and flight conveyor with 125 mm wide flight in a 150 mm wide painted case 280 mm deep. The conveyor is 5.0 metres long, no drive and the conveyor is not in very good condition.

Price - £400

+

UCPE-4507

Redler Enmasse chain and flight conveyor with 125 mm wide flight in a 150 mm wide painted case 280 mm deep. The conveyor is 6.9 metres long and has a drive unit but is not in very good condition.

Price - £650

+

UCPE-5902

Carier C5 chain and flight conveyor 12.0 metres long with galavanised case and quiet running strips. Output up to 25 tph on cereals.

Price - £1,250

+

UCPE-5661

Carier 5" chain and flight conveyor 4 meters long.

Price - £400

+

UCPE-5660

Carier 5" chain and flight conveyor 6 meters long.

Price - £600

+

UCPE-6060

100mm chain and flight conveyor 5 metres long with a body depth of 450mm and an intake hopper 3 metres long x 100m deep. Geared drive projects 600m to one side.

Price - £600

+

UCPE-5900

Carier C8 chain and flight conveyor 4.5 metres long with galavanised case. Output up to 40 tph on cereals.

Price - £1,000

+

UCPE-5901

Carier C8 chain and flight conveyor 6.0 metres long with galavanised case. Output up to 40 tph on cereals.

Price - £1,250

+

UCPE-5658

Carier 8" chain and flight conveyor with swan neck. 7 meters long with 2.2meter x 0.6 meter hopper. Rated 20 tph

Price - £800

+

UCPE-4503

200 mm wide chain and flight conveyor 8.0 metres long with galvanised case 320 mm deep. No drive and the chain is broken.

Price - £300

+

UCPE-4506

Redler Enmasse chain and flight conveyor with 230 mm wide flight in a 250 mm wide painted case 360 mm deep. The conveyor is 5.6 metres long and has a Rocon rotation detector on the tail idler but no drive.

Price - £650

+

UCPE-4512

Redler Enmasse chain and flight conveyor with 230 mm wide flight in a 250 mm wide painted case 360 mm deep. The conveyor is 11.8 metres long and comes with a drive and it has a Rocon rotation detector on the tail idler. 7.28 metres of the case is 530 mm deep

Price - £1,750

+

UCPE-5835

Grespan 35/25 chain and flight conveyor 250mm wide x 370mm deep x 4.2M long. The conveyor has a galvanised case, 1.5kw drive and will handle up to 75M3/hr. Some damage to motor fan cover.

Price - £2,000

+

UCPE-5734

Cimbria stainless steel cased chain and flight conveyor with swan neck bend and inclined outlet end. The case is 260 mm wide x 345 mm deep and the 240 mm wide chain carries heavy duty plastic flights. The stainless body needs some work. The conveyor is 9.3 metres long. Spare chain and flights available at extra cost.

Price - £1,500

+

Picking Table

UCPE-3804

Waste recycling system comprising a receiving hopper for filling with a power shovel. This section is 4.0 metres long and has a 1.0 metre wide smooth slightly troughed belt with a spring mounted impact plate below it. This feeds onto a second conveyor which is 8.0 metres long and has a 1.0 metre wide smooth troughed belt which rises to 4.0 metres high and feeds onto a picking table which has a receiving hopper on the inclined 3.0 metre long section followed by a 4.2 metre long four station picking table with walkways, handrails and canvas top cover. The belt is chevron type 1.0 metre wide. The main conveyors have electric motors and the picking table has hydraulic motors. The unit was built in 1991.

Price - £22,000

+

UCPE-4509

Tickhill Engineering conveyor probably for vegetable sorting or washing. It is 9.0 metres long and has a 900 mm wide plastic mesh belt with cleats. Not in good order.

Price - £750

+

Pneumatic

UCPE-5477

Robuschi blower in a Robox acoustic enclosure with air inlet and cooling fan. The blower is a model RB-LP 50/F driven at 3337 rpm by an 11.0 kw motor. It will deliver 727 M3/hr at 281 mbar.

Price - £2,000

+

UCPE-5478

Robuschi blower in a Robox acoustic enclosure with air inlet and cooling fan. The blower is a model RB-LS 20/SP driven at 3673 rpm by a 7.5 kw motor. It will deliver 227 M3/hr at 439 mbar.

Price - £1,250

+

UCPE-5963

PAM pneumatic transporter on towable chassis.

Price - £1,000

+

UCPE-5965

7 No pneumatic blowers mostly Aerzen. Offered as a package but can be split.

Price - £2,100

+

UCPE-6011

Aerzen type blower and associated pipework.

Price - £1,000

+

UCPE-6025

PAM blower with 18.5kw drive, Ser No 972321 believed 1997 vintage.

Price - £500

+

UCPE-1519

Pneumatic transfer system for herbs or low density products comprising a small hopper with a variable speed tray feeder discharge feeding into a suction pipeline. The suction line goes to a small receiving hopper with an Airmaster RJX 3/9/33 reversejet filter with 1.5kw fan and silencer. The hopper outlet is fitted with a pneumatic slide for releasing the batch.

Price - £1,000

+

Round Case Screw

UCPE-5930

Nazzareno 300mm diameter round case screw conveyor 4.2M long with stand off bearings and 2.2kw in-line geared drive. Built 2008. Output up to 25M3/hr.

Price - £2,000

+

UCPE-6087

500mm diameter x 7.0 metre long heavy duty round cased screw conveyor with 7.5kw in line geared drive. Excellent condition.

Price - £5,000

+

Shrouded Chain

UCPE-5424

Twin chain conveyor with 200 mm working width x 3.5 metres long. No top covers, body has been repaired but drive is complete. A roll of 340 mm twin chain with flights with the conveyor. Assumed to be compatible.

Price - £500

+

UCPE-5312

Twin chain conveyor with 400 mm working width. The conveyor is 6.35 metres long and it has a 0.75kw drive and an inlet with feed control gate.

Price - £2,000

+

UCPE-5731

Twin chain conveyor with 820 mm wide body 510 mm deep. The chain is 800 mm wide and has heavy duty plastic flights. The conveyor is 11.5 metres long including a swan neck bend and inclined outlet end with drive. In poor condition but some spares available at extra cost.

Price - £2,000

+

UCPE-5730

Twin chain conveyor with 820 mm wide body 510 mm deep. The chain is 800 mm wide and has heavy duty plastic flights. The conveyor is 14 metres long including a swan neck bend and inclined outlet end with drive. In poor condition but some spares available at extra cost.

Price - £2,500

+

Thrower

UCPE-5419

Swift twin grain thrower with in feed hopper 2 x 200mm diameter screw feeders and 15kw paddle wheel. Rated at up to 100 tph.

Price - £1,250

+

UCPE-4637

Ardleigh Swift paddle type grain thrower on wheels with motorised auger force feeding a rotating paddle thrower with a 4.0 kw drive. Believed to have a capcity of up to 40 tph.

Price - £450

+

U Trough Screw

UCPE-5968

7 No U trough screw conveyors, various diameters, various lengths. Offered as a package.

Price - £2,800

+

UCPE-6058

Taurus 120mm diameter x 1.1 metre long U trough screw conveyor with side mounted geared drive that projects 300mm from body.
( 4 available )

Price - £500 each

+

UCPE-6002

150 mm diameter U trough screw conveyor 3.4 metres long with drive.

Price - £300

+

UCPE-6009

150 mm diameter x 6.0 metre long U trough screw conveyor with drive.

Price - £400

+

UCPE-4504

200 mm diameter U trough screw conveyor 3.0 metres long with top mounted head drive.

Price - £400

+

UCPE-6113

220 m diameter U trough screw conveyor 1.3 metres long, no drive.

Price - £100

+

UCPE-5516

250 mm diameter U trough screw conveyor 2.1 metres long with drive.

Price - £450

+

UCPE-5514

300 mm diameter U trough screw conveyor 2.1 metres long, no drive.

Price - £500

+

UCPE-5515

300 mm diameter U trough screw conveyor 3.0 metres long, no drive.

Price - £550

+

UCPE-6056

320mm dia x 2 metre long U trough screw conveyor with in-line drive requiring another 780mm in length. Some damage to drive alignment.

Price - £600

+

UCPE-4608

Purpose made 400 mm dia levelling screw 2.65 metres long mostly in stainless steel. The conveyor has an open base, a top mounted drive and a centrally mounted inlet hopper. The flighting is contrawound to move the product in two directions from the central filling hopper

Price - £1,000

+

UCPE-5733

600 mm diameter U trough screw conveyor 3.0 metres long with stainless steel case and 2.2kw drive but no drive guard or top covers.

Price - £2,500

+

UCPE-4605

Texpan U trough screw conveyor 600 mm dia x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shuttle from side to side in a framework with rails, a drive motor and limit switches. The framework is 6.6 metres long x 1.4 metres

Price - £2,000

+